-2%

2D 萬用型條碼掃描模組 支援 20種條碼類型 Arduino 樹莓派可用 附函數庫直接使用

原始價格:NT$2,300。目前價格:NT$2,250。 (未稅)

描述

2D 萬用型條碼掃描模組 支援 20種條碼類型 Arduino 樹莓派可用 附函數庫直接使用 2D Barcode Scanner Breakout

2D 萬用型條碼掃描模組 是一款漂亮的小分線板,具有 DYScan 的 DE2120 條碼掃描儀模塊。DE2120 使用攝像頭讀取 20 種不同的條碼符號(一維和二維),並結合機載圖像處理來識別和解碼從 UPC 代碼到二維碼的所有內容。該模塊還具有兩個 LED:一個用於照明,另一個用於投射您習慣從基於激光的掃描儀看到的紅線。這款分線板可讓您輕鬆探索 DE2120 的所有功能,而無需處理繁瑣的扁平柔性電纜。掃描儀的 USB 接口通過板載 USB-C 連接器暴露。蜂鳴器和狀態 LED 通過適當的驅動電路連接到模塊,並在“觸發”引腳上提供按鈕觸覺開關。當您準備好將模塊整合到您的嵌入式項目中時,您可以利用 5 針接頭直接訪問 TTL 串行針腳、電源針腳和触發輸入。

該模組可以通過使用串行接口或通過掃描設置手冊中的命令條碼來配置。所有鍵盤、HID 和串行都可以通過單個 USB-C 連接器傳輸。DE2120 具有枚舉所有三種協議(包括 CDC 串行驅動程序)的獨特能力,因此該設備顯示為標準 COM 端口。

特色與規格

  • 用於 USB HID 接口和虛擬 COM 端口的 USB-C 連接器
  • 讀取 20 種不同的條碼 支援 1D , 2D 條碼
  • 1D Symbologies
    • UPC-A
    • UPC-E
    • EAN-8
    • EAN-13
    • Code 128
    • GS1-128
    • Code 39
    • Code 93
    • Code 11
    • Interleaved 2-of-5
    • Matrix 2-of-5
    • Industrial 2-of-5
    • Codabar
    • MSI
    • GS1 DataBar
    • Datalogic 2-of-5
  • 2D Symbologies
    • QR Code
    • Data Matrix
    • PDF 417
    • Micro PDF 417
    • Aztec Code

文件與資源

2D Barcode Scanner Breakout is a nifty little breakout board featuring the DE2120 barcode scanner module from DYScan. The DE2120 reads 20 different barcode symbologies (both 1D and 2D) using a camera coupled with on-board image processing to identify and decode everything from UPC codes to QR codes. The module also features two LEDs: one for illumination and one to project the red line that you’re used to seeing from laser-based scanners.

This breakout board makes it easy to explore all of the capabilities of the DE2120 without dealing with finicky flat flex cables. The scanner’s USB interface is exposed via the on-board USB-C connector. A buzzer and status LED are connected to the module through appropriate drive circuits and a push button tactile switch is provided on the “trigger” pin. When you’re ready to incorporate the module into your embedded project, you can leverage the 5 pin header for direct access to the TTL serial pins, power pins, and trigger input.

The module can be configured either by using the serial interface or by scanning command barcodes found in the Settings Manual.

All keyboard, HID, and serial can be transmitted over the single USB-C connector. The DE2120 has the unique ability to enumerate all three protocols including a CDC serial driver so the device appears as a standard COM port.

Features

  • USB-C Connector for USB HID Interface and Virtual COM port
  • Reads 20 different symbologies
    • 1D Symbologies
      • UPC-A
      • UPC-E
      • EAN-8
      • EAN-13
      • Code 128
      • GS1-128
      • Code 39
      • Code 93
      • Code 11
      • Interleaved 2-of-5
      • Matrix 2-of-5
      • Industrial 2-of-5
      • Codabar
      • MSI
      • GS1 DataBar
      • Datalogic 2-of-5
    • 2D Symbologies
      • QR Code
      • Data Matrix
      • PDF 417
      • Micro PDF 417
      • Aztec Code

 

商品評價

目前沒有評價。


搶先評價 “2D 萬用型條碼掃描模組 支援 20種條碼類型 Arduino 樹莓派可用 附函數庫直接使用”