0 個商品查看購物車
-21%
DFRobot 傾斜式雨量感應器支援 IIC 與 UART 通訊 雨量感測器
原始價格：NT$1,690。NT$1,330目前價格：NT$1,330。 (未稅)
- 描述
- 評價 (0)
描述
描述
DFRobot 傾斜式雨量感應器支援 IIC 與 UART 通訊 雨量感測器
DFRobot 傾斜式雨量感應器 基於傾斜式雨量原理，這個雨量感應器能夠提供使用者降雨量的數值（以毫米為單位）以及系統運作時間。感應器內部並不含有電子元件，並具有中空底部設計，使雨水能夠自動排出，使其更加穩定和靈敏。
它支援I2C和UART數據輸出，與micro:bit、Arduino、ESP32和Raspberry Pi等兼容。整合了易於使用的Gravity介面，這款雨量感應器可以輕鬆地通過提供的即用程式庫來建立一個雨量監測系統。這款傾斜式雨量感應器能夠為氣象站、環境監測站或智慧農場提供高質量的降雨數據。
傾斜式雨量感應器是氣象觀測中常用的降水監測裝置之一。它由一個收集容器和一個測量機制組成。在降雨期間，水通過頂部進水口進入收集容器，然後流入通過漏斗進入的傾斜式雨量桶中。當累積了一定量的水時，傾斜式雨量桶失去平衡並傾斜，每次傾斜都會生成一個脈衝信號。通過記錄脈衝信號的數量，控制器可以計算降雨量。
注意：信號適配器板不防水。請勿將信號適配器板暴露在雨中。
特點：
- 測量降雨量（以毫米為單位）和系統運行時間
- 內部無電子元件
- 中空底部設計，可自動排水
- 支援I2C和UART數據輸出
- 與micro:bit、Arduino、ESP32和Raspberry Pi等兼容
- 整合Gravity界面
- 提供即用程式庫，輕鬆建立雨量監測系統
應用：
- 氣象監測
- 環境監測
- 智慧農業
- 研究和教育
規格：
- 工作電壓：3.3至5.5V DC
- 工作電流：＜3mA
- 輸出信號：I2C / UART
- 解析度：0.28mm
- 工作溫度：-40至85°C
- PCB 尺寸：32mm x 37mm / 1.26 x 1.46 英寸
- 傾斜式雨量桶尺寸：118mm59mm80mm / 4.65 x 2.32 x 3.15 英寸
- 安裝孔尺寸：3.1mm
- 重量：119g（傾斜式雨量桶）、5.3g（PCB）
文件：
配送清單：
- 重力：傾斜式雨量感應器 x1
- 信號適配器 x1
- 重力-4P I2C/UART 感應器連接器 x1
Gravity: Tipping Bucket Rainfall Sensor – I2C & UART
This DFRobot rainfall sensor is a reliable and convenient tool for measuring rainfall.
Based on the principle of tipping bucket rainfall, the rainfall sensor provides users with rainfall values in millimeters and system operating time. The sensor has no electronic components inside and features a hollow bottom design that allows rainwater to automatically drain, making it more stable and sensitive.
It supports I2C and UART data outputs, compatible with micro:bit, Arduino, ESP32, Raspberry Pi. Integrated with the easy-to-use Gravity interface, this rainfall sensor can be used to set up a rain monitoring system easily with the provided ready-to-go libraries. The tipping bucket rainfall sensor can provide high-quality rainfall data for weather stations, environmental monitoring stations, or smart farms.
What is a tipping bucket rainfall sensor?
The tipping bucket rainfall sensor is one of the commonly used precipitation monitoring devices in meteorological observations. It consists of a collection container and a measuring mechanism. During rainfall, water enters the collection container through the top inlet and flows into the tipping bucket through a funnel. When a certain amount of water accumulates, the tipping bucket loses its balance and tips over, generating a pulse signal with each tip. By recording the number of pulse signals, the controller can calculate the rainfall amount.
Note: The signal adapter board is not waterproof. Do not expose the signal adapter board to rain.
FEATURES
- Measures rainfall in millimeters and system operating time
- No electronic components inside
- Hollow bottom design for automatic drainage
- Supports I2C and UART data outputs
- Compatible with micro:bit, Arduino, ESP32, Raspberry Pi
- Integrated with Gravity interface
- Ready-to-go libraries for easy setup of rain monitoring system
APPLICATIONS
- Weather monitoring
- Environmental monitoring
- Smart farming
- Research and education
SPECIFICATION
- Working Voltage: 3.3 to 5.5V DC
- Working Current: ＜3mA
- Output Signal: I2C/UART
- Resolution: 0.28mm
- Operating Temperature: -40 to 85°C
- PCB Size: 32mm x 37mm/1.26 x 1.46 inches
- Tipping Bucket Size: 118mm*59mm*80mm/4.65 x 2.32 x 3.15inches
- Mounting Hole Size: 3.1mm
- Weight: 119g (Tipping bucket), 5.3g (PCB)
DOCUMENTS
SHIPPING LIST
- Gravity: Tipping Bucket rainfall Sensor x1
- Signal Adapter x1
- Gravity-4P I2C/UART Sensor Connector x1
評價 (0)
搶先評價 “DFRobot 傾斜式雨量感應器支援 IIC 與 UART 通訊 雨量感測器”
你必須登入才能發表評論。
商品評價
目前沒有評價。