描述

Digi Zigbee XBee PRO S2C ZigBee w/63 mW  Wire Antenna通訊模組

Digi Zigbee XBee PRO S2C Zigbee 模組 (802.15.4)  Zigbee模組(802.15.4) XBee PRO ZB S2C TH Wire Antenna

  

Digi Zigbee XBee PRO S2C ZigBee w/63 mW Wire Antenna通訊模組 特色

原廠 Digi XBee And Digi XBee-Pro Zigbee Datasheet PDF

Digi Zigbee XBee PRO S2C 規格

• 頻率: 2.4 GHz
• 範圍: 2 mile
• 數據率: 250 kb/s
• 靈敏度: – 101 dBm
• 工作電源電壓: 2.7 V to 3.6 V
• 電源電流傳輸: 120 mA
• 電源電流接收: 31 mA
• 輸出功率: 63 mW
• 最高工作溫度: + 85 C
• 尺寸: 3.294 cm x 2.438 cm
• 封裝: Tray
• 品牌: Digi International
• 接口類型: SPI, UART
• 天線連接器類型: Wire

XBee PRO S2C ZigBee w/63 mW Wire Antenna

This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. Please refer to the XBee/XBee-PRO ZB (S2C) product manual for more information.

Note1: If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. The Series 2 requires considerable setup and configuration.

Note2: Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.

Note3: If you are using these outside of the United States, please check with your local laws regarding radio communication.