DS3231 AT24C32 高精度時鐘 RTC 模組 IC 通訊 時鐘存儲模組

描述

DS3231 AT24C32 高精度時鐘 RTC 模組 IC 通訊 時鐘存儲模組

• 1.尺寸:38mm（長）*22mm（寬）*14mm（高）
• 2.重量:8g
• 3.工作電壓:3.3–5.5V
• 4.時鐘晶片:高精度時鐘晶片DS3231
• 5.時鐘精度:0-40℃範圍內,精度2ppm,年誤差約1分鐘
• 6.帶2個日曆鬧鐘
• 7.可編程方波輸出
• 8.即時時鐘產生秒、分、時、星期、日期、月和年計時，並提供有效期到2100年的閏年補償
• 9.晶片內部自帶溫度感測器,精度為±3℃
• 10.存儲晶片:AT24C32（存儲容量32K）
• 11.IIC匯流排界面,傳輸速度400KHz（工作電壓為5V時）
• 12.可級聯其他IIC設備,24C32位址可通過短路A0/A1/A2修改,默認地址為0x57
• 13.帶可充電電池CR2032,保證系統斷電後,時鐘任然正常走動
• 14.包裝方式:單個防靜電包裝

DS3231 AT24C32 IIC Module Precision Real Time Clock Memory Module

Save time and high precision addition, DS3231 also has some other features that extend the system host of additional features and a range of options. The device integrates a very precise digital temperature sensor, through the I2C * interface to access it (as the same time). This temperature sensor accuracy is ±3°C. On-chip power supply control circuit can automatically detect and manage the main and standby power (i.e., low-voltage battery) to switch between the power supply. If the main power failure, the device can continue to provide accurate timing and temperature, performance is not affected. When the main power re-power or voltage value returns to within the allowable range, the on-chip reset function can be used to restart the system microprocessor.

Module parameters:
1. Size: 38mm (length) * 22mm (W) * 14mm (height)
2. Weight: 8g
3. Operating voltage :3.3 – 5 .5 V
4. Clock chip: high-precision clock chip DS3231
5. Clock Accuracy :0-40 ¡æ range, the accuracy 2ppm, the error was about 1 minute
6. Calendar alarm clock with two
7. Programmable square-wave output
8. Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
9. Chip temperature sensor comes with an accuracy of ±3°C
10. Memory chips: AT24C32 (storage capacity 32K)
11. IIC bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
12. Can be cascaded with other IIC device, 24C32 addresses can be shorted A0/A1/A2 modify default address is 0x57