FT232BL/RL USB 轉 TTL 串口模組

描述

FT232BL/RL USB 轉 TTL 串口模組  FT232模組 USB轉串口 , USB轉TTL , Arduino 韌體升級下載 刷機板 FT232BL/RL 金色版本

• 採用原裝FT232BL工業級芯片,外置EEPRON(93C46)更穩定, 支持Windows 10
• 支持3種供電模式：5V對外供電；3.3V對外供電；由外部供電（要求3.3V-5V）
• 帶3個LED：TXD LED、RXD LED、POWER LED
• GND、RXD、TXD、3V3、5V：採用彎排針引出
• 其餘功能PIN：預留焊盤CTS、RTS
• 帶500MA自恢復保險絲反接不燒

應用案例：

RS-232傳統器件升級為USB
USB轉RS-232串行適配器
使用說明：（以接入MCU為例）

GND：接GND
RXD：接MCU.TX （ 信號流向：MCU.TX >> FT232 >> PC.RX ）
TXD：接MCU.RX （ 信號流向：MCU.RX << FT232 << PC.TX ）
3V3/5V：輸出3.3V或5V（模塊由USB供電，須將跳線帽跳到3.3V或5V）
RTS：接MCU.CTS （ 信號流向：MCU.CTS << FT232 << PC.RTS ）
CTS：接MCU.RTS （ 信號流向：MCU.RTS >> FT232 >> PC.CTS ）

FT232 module USB serial USB TTL upgrade download brush plate FT232BL RL

The FT232 module USB serial USB TTL upgrade download brush plate FT232BL RL tuhao gold
Material:metal
Product characteristics:
Using FT232BL industrial chip, external EEPRON (93C46) more stable
Support Windows 10
Support 3 power supply modes: 5V external power supply; Three3V external power supply; external power supply (request 3.3V-5V)
Take 3 LED:TXD, LED, RXD, LED, POWER, LED
GND, RXD, TXD, 3V3, 5V: the bent pin out
Other functions PIN: reserved pads, CTS, RTS
With 500MA self recovery fuse, not connected to burn
Application case:
RS-232 traditional device upgraded to USB
USB to RS-232 serial adapter
Directions for use (to access MCU as an example)
GND: OK, GND
RXD: connect MCU.TX (signal flow: MCU.TX, FT232, PC.RX)
TXD: connect MCU.RX (signal flow direction: MCU.RX, FT232, PC.TX)
3V3/5V: output 3.3V or 5V (the module is powered by USB, jump the jumper cap to 3.3V or 5V)
RTS: connect MCU.CTS (signal flow direction: MCU.CTS, FT232, PC.RTS)
CTS: connect MCU.RTS (signal flow: MCU.RTS, FT232, PC.CTS)