Gravity: I2C LCD1602 RGB彩色背光液晶屏 DFRobot 原裝進口

描述

Gravity: I2C LCD1602 RGB彩色背光液晶屏

您是否厭倦了黑/白液晶屏？你想嘗試一個色彩繽紛的嗎？帶有RGB背光顯示模塊的 Gravity: I2C LCD1602 RGB彩色背光液晶屏 將為您帶來全新的屏幕體驗。它配備RGB全彩背光，有1600萬種顏色。 通常 Arduino LCD顯示器項目將很容易耗盡引腳資源，尤其是Arduino Uno。線焊和連接也非常複雜。該  Gravity: I2C LCD1602 RGB彩色背光液晶屏 使用I2C通信接口。這意味著LCD顯示器只需要4個引腳：VCC，GND，SDA，SCL。它將在Arduino上至少保存4個數字/模擬引腳。和Gravity界面使我們更容易使用 Gravity ：IO擴展屏蔽。

DFRobot Gravity I2C LCD1602彩色背光液晶屏採用通用Gravity i2C介面，僅需兩根通信線，即可完成通信與背光控制。液晶屏可以顯示2×16個字元，支援螢幕滾動，游標移動等功能。沒有繁瑣的接線，沒有複雜的代碼，通過專門的Arduino庫，就可以完成所有的設計。

Gravity: I2C 16×2 Arduino LCD with RGB Backlight Display

Have you been fed up with Black/White LCD screen? Do you want to try a colorful one? DFRobot I2C 16×2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color.
Usually, Arduino LCD display projects will run out of pin resources easily, especially with Arduino Uno. And it is also very complicated with the wire soldering and connection. This I2C 16×2 LCD Screen is using an I2C communication interface. It means it only needs 4 pins for the LCD display: VCC, GND, SDA, SCL. It will saves at least 4 digital / analog pins on Arduino. And Gravity interface make it easier to use with our Gravity: IO expansion shield.

Specification

• Operating Voltage: 3.3V ~ 5.0V
• Operating Current: ≤60mA
• Display: 16 * 2
• Communication: IIC / I2C
• Backlight: RGB adjustable backlight (16 million)
• Operating Temperature: -20 to + 70 ℃
• Storage Temperature: -30 to + 80 ℃
• Dimension: 87.0 * 32.0 * 13.0mm/3.42 * 1.26 * 0.51 inches

Board Overview