Linkit 7688 Duo Grove 介面感測器擴充板 Grove Breakout for LinkIt Smart 7688 Duo

描述

Linkit 7688 Duo Grove 介面感測器擴充板 Grove Breakout for LinkIt Smart 7688 Duo

Linkit 7688 Duo Grove 介面感測器擴充板 適用於 LinkIt TM 的 Grove Breakout Smart 7688 Duo 是集成的 Grove端口和LinkItTM Smart 7688 Duo開發板的功能擴展板。這個分線板將為更快的原型設計節省大量工作，特別是對於初學者來說，通過簡化的佈線程序。所以它將幫助初學者快速入門。它支持I2C，UART等串行總線，並可訪問LinkItTM Smart 7688 Duo的保留原始引腳。

LinkIt Smart 7688 Duo（緊湊型控制器板）是一個開放式開發板，基於OpenWrt Linux發行版MT7688和ATmega32u4。該主板專為實現智能家居Rich Application IoT設備的原型設計而設計。

Linkit 7688 Duo Grove 介面感測器擴充板 特徵

• Grove接口：I2C×3，模擬×3，數字×6

規範

• ??輸入電壓：5.0V（帶USB電源端口）
• 工作電壓：3.3V
• 調試引腳與MT7688相符
• 其他引腳與ATmega32U4連接。

應用創意

---

• 智能家居/網管硬件
• 機器人
• 智能多媒體設備
• 教學

參數規格

---

• 輸入電壓：5.0V（使用USB接口供電）
• 工作電壓：3.3V
• 調試引腳連接到MT7688，其他引腳連接到ATmega32U4。

概述簡單描述硬件

---

!!!注意在插入LinkIt Smart 7688 Duo時，注意按照擴展板上絲印標識的方向插入。

格羅夫接口

連接豐富的Grove接口功能模塊。使用這種接口，您不需要跳線或焊接，就可以使用這些功能模塊製作更豐富的項目。

Grove Breakout for LinkIt Smart 7688 Duo

Grove Breakout for LinkItTM Smart 7688 Duo is a Grove port integrated and a feature expansion board for LinkItTM Smart 7688 Duo development board. This breakout board will save a lot of work for quicker prototyping, especially for novices through simplified wiring procedure. So it will help a beginner get a quick start. It supports serial buses like I2C, UART and provides access to reserved original pins of LinkItTM Smart 7688 Duo.

LinkIt Smart 7688 Duo(a compact controller board) is an open development board, based on the OpenWrt Linux distribution, MT7688 and ATmega32u4. The board is designed especially to enable the prototyping of Rich Application IoT devices for smart house.

Features

• Grove interfaces: I2C × 3, Analog× 3, Digital× 6

Specification

• ŸInput voltage: 5.0V(With USB Power port)
• Operating voltage: 3.3V
• Debug pins conect with MT7688
• Other pins connect with ATmega32U4.

Grove Breakout for LinkIt Smart 7688 Duo is a grove port integrated and a feature expansion board for LinkIt Smart 7688 Duo[1] development board. This breakout board will save a lot of work for quicker prototyping, by the simplified wiring procedure, even a beginner who has little electronic knowledge can start a project quickly. It supports serial buses like I2C, UART and provides access to reserved original pins of LinkItTM Smart 7688 Duo.

[1] LinkItTM Smart 7688 Duo is an open development board based on the OpenWrt Linux distribution, MT7688 and ATmega32u4. The board is designed especially to enable the prototyping of Rich Application IoT devices for Smart-Home.