Raspberry Pi Zero / Pi Zero W / BPI-M2 Zero 專用樹莓派紅白機殼

描述

Raspberry Pi Zero / Pi Zero W / BPI-M2 Zero 專用樹莓派紅白機殼

Raspberry Pi Zero / Pi Zero W 專用樹莓派紅白機殼 的設計適合Pi Zero和Pi ZeroW。這些官方保護套由幾個部分組成，可以保護Raspberry Pi Zero免受接線電線等可能使其短路的影響，同時仍然允許完全訪問板。只需將RPi卡入機箱的下半部分，然後卡入所需的頂部即可。無需任何工具！

每種情況都有一個標準的底座，該底座帶有一個可接入GPIO的切口和三個蓋子的選擇：一個標準蓋子，一個GPIO蓋子（允許從上方訪問GPIO引腳）和一個攝像頭蓋子（當與隨附的短相機電纜一起使用，可以將Raspberry Pi相機整齊地安裝在其中。此外，每種情況都包括4厘米長的CSI電纜和四個橡膠腳。

注：本商品不包括樹莓派或攝像頭模組。

出貨包含

• 1x Base
• 1x Standard Lid
• 1x GPIO Lid
• 1x Camera Lid
• 1x Short Camera Cable
• 4x Rubber Feet

The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short it out while still allowing full access to the board. Simply snap the RPi into the bottom half of the enclosure, then snap on a desired top. No tools required!

Each case has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a standard lid, a GPIO lid (allowing access to the GPIO pins from above) and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi camera to be fitted neatly inside it). Additionally, each case includes a 4cm long CSI cable and four rubber feet.

Note: This case does NOT include a Raspberry Pi or Camera Module.