SparkFun Qwiic pHAT v2.0 樹莓派擴展板 Raspberry Pi 支援 Jetson NANO

描述

SparkFun Qwiic pHAT v2.0 樹莓派擴展板 Raspberry Pi 支援 Jetson NANO

SparkFun Qwiic pHAT v2.0 樹莓派擴展板 為您提供進入SparkFun的 Qwiic 生態系統的最快，最簡單的方法，同時仍使用您已經廣為人知和喜愛的Raspberry Pi。Qwiic pHAT將Raspberry Pi上的I ² C總線（GND，3.3V，SDA和SCL）連接到HAT上的Qwiic連接器陣列。由於Qwiic系統允許使用不同地址的菊花鍊板，因此您可以堆疊盡可能多的傳感器，以創建感應功率塔！

SparkFun Qwiic pHAT v2.0 樹莓派擴展板 具有四個Qwiic連接端口（側面有兩個，垂直有兩個），所有端口都在同一I ² C總線上。我們還確保為可能需要3.3V以上電壓的電源板添加一個簡單的5V螺絲端子和一個通用按鈕（可以選擇使用腳本關閉Pi ）。同時進行了更新，板上的安裝孔現在已間隔開，以適應典型的Qwiic板尺寸1.0“ x 1.0”。該HAT與任何使用標準2×20 GPIO接頭以及NVIDIA Jetson Nano和Google Coral的Raspberry Pi兼容。

特色

• 4個Qwiic連接端口
• 1個5V耐壓螺釘端子
• 1個通用按鈕
• HAT兼容的40針母接頭

文件與資源

• 原理圖
• 鷹文件
• 板子尺寸
• 聯播指南
• Qwiic信息頁面
• GitHub硬件回購
• Raspberry Pi資源頁面

SparkFun Qwiic pHAT v2.0 for Raspberry Pi

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I²C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors on the HAT. Since the Qwiic system allows for daisy-chaining boards with different addresses, you can stack as many sensors as you’d like to create a tower of sensing power!

The Qwiic pHAT V2.0 has four Qwiic connect ports (two on its side and two vertical), all on the same I²C bus. We’ve also made sure to add a simple 5V screw terminal to power boards that may need more than 3.3V and a general-purpose button (with the option to shut down the Pi with a script). Also updated, the mounting holes found on the board are now spaced to accommodate the typical Qwiic board dimension of 1.0″ x 1.0″. This HAT is compatible with any Raspberry Pi that utilizes the standard 2×20 GPIO header as well as the NVIDIA Jetson Nano and Google Coral.

Features

• 4x Qwiic Connection Ports
• 1x 5V Tolerant Screw Terminal
• 1x General Purpose Button
• HAT-compatible 40-pin Female Header