描述

TS01 非接觸式紅外溫度感測器模組 輸出 0-3V DCI 最高等級

TS01 非接觸式紅外溫度感測器模組 主要功能為遠程非接觸紅外溫度檢測，可以不接觸目標而通過測量物體發出的紅外輻射強度計算出物體的表面溫度，具有內部溫度補償，可準確檢測環境溫度及目標溫度。傳感器內部完全密封，採用金屬材質外殼，具有防水、防塵等優點，在輸出數據穩定可靠的前提下更具有超越眾多市場同類產品的檢測性能。它已在寬溫度範圍內執行出廠校準： TS01 非接觸式紅外溫度感測器模組 工作溫度-40℃ 至85°C，測量溫度-70 ℃至380°C。在寬溫度範圍內的精度高達0.5°C

TS01 非接觸式紅外溫度感測器模組 內置菲涅爾透鏡，日光免疫，免標定。DCI 系列為目前最高等級，帶梯度溫度補償，FOV角低至5°，也就是說對於10CM外徑的發熱源，最遠距離為116CM。

特性

• 非接觸式溫度檢測
• 工業級工作溫度範圍
• 模擬電壓輸出
• 金屬外殼封裝

 

技術規格

• 供電電壓：5.0~24V DC
• 工作電流：20mA
• 信號輸出：模擬電壓0~3V
• 工作溫度：-40℃~85℃
• 測量溫度：-70℃~380℃
• 測量精度：±0.5℃~±4℃
• FOV視場角：5°
• 防護等級: IP65
• 探頭直徑：15.4 mm
• 探頭長度：78 mm
• 電纜長度：1.5m
• 接口類型：杜邦3Pin+杜邦1Pin

相關文檔

• 產品維庫
• 產品說明書

TS01 Non-contact IR Temperature Sensor 0-3V

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperature compensation for the sensor greatly ensures the accuracy of the temperature measurement. The all metal package of the sensor makes it able to protect against impact, water, dust and so on. Given stable output data, this temperature sensor can exhibit a much better measurement performance than most other similar products on the market. The product has been calibrated in wide temperature range before leaving the factory. With an operating temperature of -40℃-85℃, the sensor can be used to measure the temperature of -70℃~380℃ while providing a maximum accuracy of 0.5°C.An optical filter (long-wave pass) that cuts off the visible and near infrared radiant flux is integrated in the package to provide ambient and sunlight immunity. As a standard, the sensor is calibrated for an object emissivity of 1. It can be easily customized by the customer for any other emissivity in the range 0.1…1.0 without the need of recalibration with a black body. Its FOV is small as 5°， which means for a heat source of 10cm outer diameter, the maximum measuring distance of the sensor can reach up to 116cm.

FEATURES

• Non-contact Temperature Measurement
• Operating Temperature Range of Industrial Grade
• Analog Voltage Output
• Metal Packaging

SPECIFICATION

• Supply Voltage: 5.0~24V DC
• Operating Current: 20mA
• Signal Output: analog voltage 0~3V
• Operating Temperature: -40℃~85℃
• Measuring Temperature: -70℃~380℃
• Accuracy: ±0.5℃~±4℃
• FOV: 5°
• Defense Grade: IP65
• Probe Diameter: 15.4 mm/0.61”
• Probe Length: 78 mm/3.07”
• Cable Length: 1.5m/59.06”
• Interface Type: DuPont 3Pin+DuPont 1Pin

DOCUMENTS

• Product wiki
• Product Manual